Used Brother LT2-B838 2 Needle industrial walking foot sewing machine is equipped with spring loaded french seaming feet. It comes complete mounted on a table with a 1/2 HP clutch motor powered with 110 VAC. Also, the machine is equipped with a pneumatic foot lift. Has reverse feed.
The french seam feet can be changed. Please contact W.S. Bessett.
Single needle extra heavy duty walking foot lockstitch cylinder bed industrial sewing machine. Shuttle bobbin style allows better clearance of heavy duty thread. The machine has a stitch length regulator that allows the operator to easily select a specific stitch length and transition into reverse feed. Mounted on a table with tall legs to allow the operator to stand while sewing. It has a pneumatic foot lift with a 20mm lift height. 550 Watt AC servo motor powers the sewing machine (requires 220 VAC 3 phase power). The motor is equipped with an easy to use Mitsubishi control that can be used to program needle position, slow/initial sewing speed, and maximum sewing speed. This unit comes with a thread stand, bobbin winder, and work light mounted to the table. There is also a flip down edge guide on the machine.
Designed to sew materials such as heavy canvas, leather, and nylon webbing. Great for sewing shoes, boots, sails, and saddles.
Comparable to an Adler 205 or Juki TSC-441
The machine comes completely assembled with table, motor, bobbin winder, and thread stand. Every machine sold from W.S. Bessett Inc. has been sewn off before shipment.
Compound Feed/Walking Foot Feeding Mechanism
Large Shuttle Bobbin
Stitch Length Regulator
Reverse Feed
Cylinder Bed Structure
Pneumatic Foot Lift
20mm Presser Foot Lift Height
12mm Maximum Stitch Length
300mm clearance between casting and needle
Flip-down Edge Guide
Number of Needles: 1
Feed Type: Walking Foot/Compound
Maximum Sew Speed: 750 S.P.M
Maximum Stitch Length: .472″ (12mm)
Presser Foot Lift Height: .787″ (20mm)
Work Space: 300mm Length between casting and needle
Needle System: 794
Motor: 550 Watt AC Servo
Power Requirement: 220 VAC 3 Phase
Single needle high speed drop feed lockstitch industrial sewing machine. It is classified as a medium duty industrial machine. Equipped with oil reservoir and automatic oil lubrication. The machine has a stitch length regulator (dial) that allows the operator to easily select a specific stitch length (5mm maximum length). To make it easier on the operator, the needle plate has groove guides etched into it for perfect seam allowance. It also comes standard with a reverse feed mechanism. Mounted on a table with a 550 Watt motor, requires 110 VAC power. It has a knee foot lift with a 13mm lift height. This unit comes with a thread stand, bobbin winder, and work light mounted to the table.
Great for sewing any garment or clothing. It is also capable of sewing light leather.
The machine comes completely assembled with table, motor, bobbin winder, and thread stand. Every machine sold from W.S. Bessett Inc. has been sewn off before shipment.
This is a new Juki LU-1510-7 single needle walking foot (compound/triple feed) industrial sewing machine. It is equipped with an Efka motor and is powered using single phase 220VAC. This machine is equipped with underbed trimmers, back tack, needle position sensor, pneumatic foot lift, and high walk function. The LU-1510-7 has a vertical axis hook with a larger capacity bobbin than a side load walking foot machine. Meaning fewer bobbin changes for higher productivity.
This machine was assembled, tuned, and tested at W.S. Bessett. Will be shipped assembled via freight. Contact W.S. Bessett with any questions.
Used Juki MO-2412N overlock industrial sewing machine. This machine uses 4 threads and 2 needles to create a mock safety stitch. This is mounted in a table with a 250 watt clutch motor using 110 VAC power. The table is equipped with an accessory drawer, sew light, and a thread stand.
The machine was recently serviced and sews great.
Can be picked up locally or shipped on a pallet by commercial freight.
Used Juki MO-6714S overlock industrial sewing machine. This serger creates a mock safety stitch using 4 threads with 2 needles. This is mounted in a table with a 1/3 HP clutch motor, powered with 110 VAC. That machine comes with an accessory drawer, sew light, and thread stand.
This was professionally tuned here at W.S Bessett and is in great working order.
Can be picked up locally or shipped on a pallet by commercial freight.
Single Needle Walking Foot Post Bed Industrial Sewing Machine. This is a great machine for sewing items with a 3 dimensional contour or bulky items. The raised post makes it great for easily manipulating the work piece around the needle for fantastic looking stitches. This is common in the upholstery industry when sewing seat cushions, headrests, and armrests. Great for handbags and totes as well. The material slides over the post which eliminates the bunching that would occur on a traditional flat bed machine. With the cushion or bag draped over the post, the operator is able to easily manage and manipulate the work. This is a unison feed/walking foot feed type which makes this perfect for heavier materials such as canvas and leather. The walking foot design means the work is held forcefully (no slip) while maintaining a smooth and consistent stitch even at high speeds.
Features of this machine include safety clutch, built in bobbin winder, 15mm Presser Foot lift (pedal), reverse feed (lever), stitch length regulator (dial), and a vertical axis 1.6 capacity hook. The machine is assembled and complete. It is equipped with a 110 VAC powered 550 Watt servo motor. The table includes a thread stand and accessory drawer. And a LED magnetic light is provided to help illuminate the needle space.
1.6 Vertical Axis Bobbin
Stitch Length Regulator (dial)
Reverse Feed
6.25″ (161.7mm) Post Height
0.590″ (15mm) Presser Foot Lift (Pedal)
Safety Clutch
Number of Needles: 1
Feed Type: Walking Foot
Maximum Sew Speed: 2000 S.P.M
Maximum Stitch Length: .236″ (6mm)
Presser Foot Lift Height: 0.590″ (15mm)
Post Height: 6.37″ (161.7mm)
Work Space: 9.75″ Needle to Casting clearance
Needle System: 134×35
Singer 300U105 industrial double needle chainstitch sewing machine. Has the factory puller. 3/4″ gauge set (needle space). We can change the gauge upon request to fit your needs. It is a needle feed machine. It comes with a table and 110 VAC motor.
This is a used industrial sewing machine. It has been refurbished and tuned. Ready to sew.
Singer 300U105 industrial double needle chainstitch sewing machine. 3/4″ gauge set (needle space). We can change the gauge upon request to fit your needs. It is a needle feed machine. It comes with a table and 110 VAC motor. Or can be sold as a head unit only.
This is a used industrial sewing machine. It has been refurbished and tuned. Ready to sew.
Singer 300W industrial double needle chainstitch sewing machine. Currently equipped with a 1/2″ gauge set. Needle feed with factory puller. Complete with table and motor.
